Verfügbarkeit:
Werktags vor 23:00 Uhr bestellt - in zwei Werktagen geliefert
30 Tage 'Nicht zufrieden - Geld zurück' Garantie
Falls vorrätig, werktags vor 23 Uhr bestellt – in zwei Werktagen geliefert
420 motivierte Mitarbeiter stehen für Sie bereit
Bestellungen ab 100 € versandkostenfrei
Zubehör
Every sound engineer knows the importance of a nice stereo image for recordings. Mono audio simply sounds a lot less dynamic and can therefore be detrimental to a good recording. In order to ensure that the recordings are of a high quality, you should be able to switch instruments between left and right. This can simply be done with this microphone pair. The microphones are identical and therefore you will experience no differences in frequencies. A piano, for instance, can therefore be mixed nicely as you will be able to hang a microphone on either side of the sound box. You can also choose to adjust the high and low tones in stereo.
As you have come to expect from AKG, the microphones are very durable and provide you with great sound quality. The microphone is also equipped with two switches. The first can be used to filter certain low tones (75 or 150 Hz) and the other switch allows you to set a threshold for the recording (0, 10 and 20 dB). In order to ensure that the microphones are well protected, the set is delivered in a transport case that also contains two windshields and microphone clips, as well as a handy bracket that allows you to place two microphones on one stand.
Empfindlichkeit (dBV/PA) | -41 |
Impedanz Mikrofon | 200 - 249 Ohm |
Max. SPL | 150 dB - 159 dB |
Max. Frequenz | 20 - 20,9 kHz |
Min. Frequenz | 20 - 21 Hz |
Low-cut filter | Ja |
Pad switch | Ja |
Richtcharakteristik | Niere |
Stereo | Ja, Matched Pair |
Microphone accessories | Mikrofon-Klemme, Windschutz, Koffer, Stereobar |
Mikrofonkapsel austauschbar | Nein |
Gewicht (inkl. Verpackung) | 1,4 kg |
Maße (inkl. Verpackung) | 28,0 x 10,0 x 22,0 cm |
- frequency range: 20 Hz to 20 kHz
- sensitivity: 9 mV/Pa (-41 dBV)
- maximum SPL: 155 dB (differs with the chosen pre-attenuation settings)
- switchable pre-attenuation: 0, 10 and 20 dB
- switchable bass filter: 75 or 150 Hz
- impedance: less than 200 Ohm
- required power supply: 9 to 52 Volt phantom power supply
- connector: 3-pin XLR
- finish: satin-nickel plated
- weight: 125 grams
Bewerten Sie das Produkt Haben Sie Fragen zum Produkt?