Behringer NX6000D Amplifier with DSP Processor kaufen?

Beschreibung
Reviews

Behringer NX6000D Amplifier with DSP Processor

Artikel-Nummer: 9000-0046-0390

Garantie: Auf dieses Produkt gibt es 3 Jahre Garantie nach Registrierung bei Behringer innerhalb der ersten 90 Tage ab Kaufdatum. Ohne Registrierung gibt es 2 Jahre Garantie.

Allgemeine Informationen

The Behringer NX6000D is a lightweight, class-D amplifier with two-channels and a massive 1,600 Watt power capacity at 8 Ohms. It's packed with modern technology such as Zero-Attack limiters and a DSP. The limiters keep a watchful eye on the operating temperatures and make sure the device doesn't overheat, even at maximum output, while SmartSense flattens out the frequency range at any level of impedance. The amplifier offers three user modes: mono, stereo and bridged. When set to bridge mode and combined with a 4-Ohm input, this amp puts 6,000 Watts at your disposal. There's an extensive DSP section on-board with a delay, crossover and 8-band parametric EQ and you can use the USB port and Behringer's NX Edit software to adjust, operate or monitor the NX6000D and create your own presets.

Produkt Informationen

RMS power (4 ohms) per channel	not specified
RMS power (8 ohms) per channel	not specified
2 Ohm-kompatibel	Nein
Verstärker-Klassifizierung	D
Number of amplifier channels	2
19 Zoll Rack-Format	2U
Amplifier output	verriegelbarer Speakeranschluss
Input connector	Klinke (6,35 mm) + XLR, USB
Inkl. Frequenzweiche	Nein
Intgrierter DSP-Prozessor	Ja
Cooling	Ventilator
Bridge-Modus	Ja
Integrierte Sicherungen	Überspannungsschutz, Thermoschutz, Schmelzsicherung, Schutz vor Gleichspannung, Peak Limiter, Clip-Indikator
Anschluss zur Parallelschaltung	Nein
Integrierter Filter	HPF, LPF, Bandpass

Gewicht und Maße sind inklusive Verpackung

Gewicht (inkl. Verpackung)	6 kg
Maße (inkl. Verpackung)	56,0 x 17,0 x 28,8 cm

Produktdetails

Behringer NX6000D
- class D amplifier
- peak power: 2x 1,600 Watts at 8 Ohms / 2x 3,000 Watts at 4 Ohms
- bridged peak power: 3200W (8 Ohms), 6000W (4 Ohms)
- frequency range: 20 - 20.000 Hz
- THD: <0.01%
- S/N ratio: >100 dB
- dampening factor: >140 dB @ 8 Ohms
connectors:
- 2x XLR/TRS combo (input CH A/B)
- 2x lockable speaker connection (output CH A/B)
- power cable
controls
- 2x volume (CH A/B)
- power
- crossover (LF/bandpass/HF, rear)
- mode (bridge/stereo/mono)
dimensions: 94 x 483 x 316 mm
weight: 6 kg